TVT IP camera default IP address
The default IP address of this camera is 192.168.226.201
TVT camera default Username
The default username is “admin”.
TVT Camera default password
The default password is “123456”.
Step 1. Download TVT IP Tool
Before taking any step you should have to install IP camera tool. Download from the above-given link. This is a secure way to download IP tool. The setup size is 14MB, so it does not take time. After downloading, Double click on the setup and install it on your computer. Now move to the next step.
Step 2. Open IP tool
Make sure the PC and IP-Cam are connected to the LAN and the IP-Tool is installed on the PC. Double click the IP-Tool icon on the desktop to run this software as shown below.
Step 3. Modify IP address
Modify the IP address. The default IP address of this camera is 192.168.226.201. Click the information of the camera listed in the above table to show the network information on the right hand. Modify the IP address and gateway of the camera and make sure its network address is in the same local network segment as the computers. Please modify the IP address of your device according to the practical situation
For example, the IP address of your computer is 192.168.1.4. So the IP address of the camera shall be changed to 192.168.1.X. After modification, please input the password of the administrator and click the “Modify” button to modify the setting.
Step 4. Open IP Camera
Double click the IP address and then the system will pop up the IE browser to connect IP-CAM. IE browser will auto download the Active X control. After downloading, a login window will pop up as shown below. Input the username and password to log in.
The default username is “admin”; the default password is “123456”.
Step 5. Finalize
After putting the IP address, IE asks to install an ActiveX component. How to install ActiveX. Install it. Now put the username and password and a press login button. All done, you got the live preview of the camera.